Add to Cart
Solar Pump Inverter 18.5kw 380v PV500 Seiver Solar Pumping Inverter
The PV500 series solar water pump inverter is a device that uses the direct current of the solar panel to convert it into alternating current and provides it to the motor or water pump. The excellent MPPT function enables the efficiency to reach 99.9% and automatically tracks the light throughout the day; it can drive a variety of different Type of water pump (permanent magnet synchronous, asynchronous, single-phase motor, etc.); vertical ventilation duct design, DC fan heat dissipation; LED keyboard, rich operating feel, custom modules can be installed. Suitable for multiple occasions applications, can be efficient and save Electricity, effectively improve the working efficiency of the pump, covering voltage levels of 220V AC and 380V AC. It supports three-phase 220V/380V water pumps, with a power range from 0.4KW to 630KW.
Product Introduction
· Application
Applicable to AM, PMSM, BLDC etc.
· Advanced MPPT algorithms
Efficiency reaches 99%
· Hybrid power
Supply Support solar power DC/Power grid AC input, and DC/AC auto switch.
· Dormancy and Wake-up function
Inverter will entry dormancy mode and wake up automatically according to sunshine intensity.
· Built-in protection
Support over-current, over-voltage, phase loss, short circuit, over-temperature and etc. protection.
· Eco-friendly
Operation without battery.
· Large water yield
Larger water yield under same condition.
· Water level control
Dry run protection, tank water level control.
· Recording functions
Recording for total power generated (Kw/h), water flow(m3), and operation time(H).
Options
1. GPRS module
All models can be configured with GPRS module for real-time remote monitoring and operation in web or in phone APP.
2. LCD Keypad
It can display three sets data at the same time.
It can display water flow and solar power generation..
It can show the meaning of parameters clearly and intuitively
Solutions
1. Inverter automatically working
When the input DC voltage lower than 230V, the inverter will turn to dormancy.
It will automatically wake up and working once input DC voltage higher than 230V.
2. Dry-run function with three solutions
1) Dry-run function without sensor.
2) Analog sensor detect Water function.
Solar Panel Configure
In the case of not exceeding the maximum input voltage, the greater the power the better, the greater the voltage the better.
① Configure Solar panel power: 1.3 times of Pump’s power.
② Configure Solar panel voltage: recommend panel Voc 360~430VDC for 220V inverter, recommend panel Voc 600~750VDC for 380V inverter.
③ Solar panel output current: solar panel’s Imp> Motor rated current
Input specication | ||
Model | PV150-2S | PV150-4T |
PV500-4T | ||
Maximum Input DC Voltage | 450VDC | 800VDC |
Re commended Voc Range | 360~430VDC | 600~750VDC |
Re commended MPPT Voltage Range | 250~350VDC | 450~600VDC |
Starting Voltage Range | PV150:80~450VDC | 230~800VDC |
Grid or backup generator input | ||
Input voltage | 2S: Single phase 220V(-15%~20%) | Three phase 380V(-15%~30%) |
Output specication | ||
Rated output voltage | 3PH 220V | 3PH 380V |
Output frequency | 0~600.00Hz (default: 0~50.00Hz) | 0~600.00Hz (default: 0~50.00Hz) |
Protection | ||
Built-in Protection | Lighting Protection, over-current,overvoltage,output phease-lose,under-load, under-voltage,short circuit, overheating, water pump run dry etc. | Lighting Protection, over-current,overvoltage,output phease-lose,under-load, under-voltage,short circuit, overheating, water pump run dry etc. |
General Parameters | ||
Application Site | No direct sunshine, no dust,cirrisuve gas, combustible gas, oil mist, steam, dripping or salinity etc. | |
Altitude | 0~2000m Derated use above 1000m, per 100m, the rated outed output currentdecrease 1% | |
Environment Temperature | -10°C~40°C (Environment Tenmperature be 40°C~50°C, please keep derated use.) | |
Humidity | 5~95% non-condensation | |
Vibration | less than 5.9 m/s² (0.6g) | |
Storage Temperature | -20°C~+70°C | |
Effciency | Rated Power Run ≥93% | |
Installation | Wall or rail mounting | |
Protection Grade | IP20 | |
Cooling | Forced Air Cooling |
Model | Rated Output Current(A) | Output Frequency(Hz) | DC Input Voltage Range(V) | Recommended Solar Power (KW) | Recommended Solar Open Circuit Voltage(Voc) | Pump Power(KW) |
PV150I-2S:DC input 70-450V DC, AC input 1 phase 220V (-15%~20%) AC;Output 1 phase 220VAC | ||||||
PV150I-2S-0.4B | 4.2 | 0-600 | 70-450 | 0.6 | 360-430 | 0.4 |
PV150I-2S-0.7B | 7.5 | 0-600 | 70-450 | 1.1 | 360-430 | 0.75 |
PV150I-2S-1.5B | 10.5 | 0-600 | 70-450 | 2.25 | 360-430 | 1.5 |
PV150I-2S-2.2B | 17 | 0-600 | 70-450 | 3.3 | 360-430 | 2.2 |
1S model:DC input 70-450V, AC input 1 phase 110-220V;Output 3 phase 110VAC | ||||||
PV150-1S-1.5B | 7.5 | 0-600 | 70-450 | 2.25 | 170-300 | 0.4 |
PV150-1S-2.2B | 9.5 | 0-600 | 70-450 | 3.3 | 170-300 | 0.75 |
2S model:DC input 70-450V, AC input 1 phase 220V (-15%~20%) ;Output 3 phase 220VAC | ||||||
PV150-2S-0.4B | 2.5 | 0-600 | 70-450 | 0.6 | 360-430 | 0.4 |
PV150-2S-0.7B | 4.2 | 0-600 | 70-450 | 1.1 | 360-430 | 0.75 |
PV150-2S-1.5B | 7.5 | 0-600 | 70-450 | 2.25 | 360-430 | 1.5 |
PV150-2S-2.2B | 9.5 | 0-600 | 70-450 | 3.3 | 360-430 | 2.2 |
4T model:DC input 230-800V, AC input 3 phase 380V (-15%~30%);Output 3 phase 380VAC | ||||||
PV150-4T-0.7B | 2.5 | 0-600 | 230-800 | 1.1 | 600-750 | 0.75 |
PV150-4T-1.5B | 4.2 | 0-600 | 230-800 | 2.25 | 600-750 | 1.5 |
PV150-4T-2.2B | 5.5 | 0-600 | 230-800 | 3.3 | 600-750 | 2.2 |
PV500-4T-4.0B | 9.5 | 0-600 | 230-800 | 6 | 600-750 | 4.0 |
PV500-4T-5.5B | 13.0 | 0-600 | 230-800 | 8.9 | 600-750 | 5.5 |
PV500-4T-7.5B | 17.0 | 0-600 | 230-800 | 11 | 600-750 | 7.5 |
PV500-4T-011B | 25.0 | 0-600 | 230-800 | 17 | 600-750 | 11 |
PV500-4T-015B | 32.0 | 0-600 | 230-800 | 21 | 600-750 | 15 |
PV500-4T-018B | 37.0 | 0-600 | 230-800 | 24 | 600-750 | 18.5 |
PV500-4T-022B | 45.0 | 0-600 | 230-800 | 30 | 600-750 | 22 |
PV500-4T-030B | 60.0 | 0-600 | 230-800 | 40 | 600-750 | 30 |
PV500-4T-037 | 75.0 | 0-600 | 230-800 | 57 | 600-750 | 37 |
PV500-4T-045 | 91.0 | 0-600 | 230-800 | 69 | 600-750 | 45 |
PV500-4T-055 | 112.0 | 0-600 | 230-800 | 85 | 600-750 | 55 |
PV500-4T-075 | 150.0 | 0-600 | 230-800 | 114 | 600-750 | 75 |
PV500-4T-090 | 176 | 0-600 | 230-800 | 134 | 600-750 | 90 |
PV500-4T-110 | 210.0 | 0-600 | 230-800 | 160 | 600-750 | 110 |
PV500-4T-132 | 253.0 | 0-600 | 230-800 | 192 | 600-750 | 132 |
PV500-4T-160 | 304.0 | 0-600 | 230-800 | 231 | 600-750 | 160 |
PV500-4T-185 | 350.0 | 0-600 | 230-800 | 240 | 600-750 | 185 |
PV500-4T-200 | 377.0 | 0-600 | 230-800 | 250 | 600-750 | 200 |
About us
FRECON is an enterprise accredited by the double soft in shenzhen city, a new high-tech enterprise which is strongly supported by central government, a professional company in the field of industrial automation, efficient energy saving and green new energy. FRECON has more than 10 years experience of development and application on frequency converter, servo driver, energy-saving control cabinet, industrial robot , Solar inverter system,electric cars and control system. Product power range covers 0.2 KW ~ 1 MW. In the aspects of EMC and safety, FRECON products are in accordance with the European Union CE directive requirements.
FRECON has more than 40 patents and copyright like inventions, utility models, appearance and software copyright, and so on.
FRECON executes the ISO9001:2008 quality system standard strictly. FRECON products are widely used in the equipment manufacturing industry and energy saving renovation project, mainly related to the elevator, petroleum, chemical, steel, ceramics, textiles, wire drawing machine, air compressor, machine tools, solar energy, and many other fields.
FRECON has five regional logistics center in China: east China(wuxi), south China (shenzhen) , north China (Beijing), southwest (chongqing), northeast (shenyang), and 21 offices in China, whose logistics and service network covers the whole country .FRECON has coinsurance centers and distribution network in more than 40 countries such as Australia, Poland, Spain, South Africa, Russia, India,Bangladesh, Vietnam, and so on.
Exhibition promotion
Packing
Frequently asked questions:
Q: Are you a trading company or a manufacturer?
Answer: We are a factory.
Q: Do you provide samples? Is it free or extra?
Answer: Yes, we can provide samples for testing at a reasonable cost. We can
Send the samples to you via DHL or UPS, usually you can receive the samples within a week.
What are your payment terms?
Answer: 100% in advance. Payment is made through the company account.
Q: What are your packaging conditions?
Answer: Usually, we use cardboard boxes. Customers can accept reasonable special packaging requirements.
Q: Do you test all products before shipping?
Answer: Yes, 100% testing should be done before shipment
Q: How long is your delivery time?
Answer: If you have inventory, it usually takes 5 to 10 days. Or 15 to 20 days (if there is no stock), whichever is the quantity. We have extensive experience in providing products to large customers, so we don't have to worry about delivery time.
With years of export experience, excellent quality, advanced services and competitive prices, frecon Electric has won the trust and support of many customers.